Description
| Max Output | 1800 |
| Max Beam Distance | 176 |
| Max Beam Intensity | 7750 |
| Max Runtime | Â 17 h 0 m / 0.7 d |
| LED | Â CREE XM-L2 U2 |
| Reflector | SMO |
| Battery | Built-in rechargeable |
| Special Modes | Â Caution Light |
| Beam Colour | White light |
| Length | Â 109.3 mm / 4.3 in |
| Weight | Â 234.5 g / 8.27 oz |
| Feature | Rechargeable |
| Activity | Outdoor/Camping |
With dual beams like the high and low beams of a car and a powerful 1800-lumen maximum output, the Nitecore BR35 Rechargeable Bike Light will light up the night in town, on the highway, or off-road. It utilizes two Cree XM-L2 U2 LEDs: one for long-range light with a maximum brightness of 1000 lumens, and another for close-range light—which eliminates the dark “dead zone” around your front wheel—with a maximum output of 800 lumens. Use the long beam for general riding, switching to the angled-down low to avoid blinding oncoming drivers. Use just the low beam when close-in visibility is more important. Use both for maximum illumination. Run times range from 1 hour on dual-beam turbo high power to 17 hours for either beam on low power.
Each beam has four output levels, selected via plus and minus push-button switches on the lamp. You’ll know which level you’ve selected, as well as the remaining battery run time, with a glance at the OLED display. A remote switch allows you to control the light without taking either hand off the handlebars, and a quick-release bracket makes it easy to remove the light if you duck into a coffee shop or convenience store. Charging the light is also easy: simply plug in the micro-USB cable. It will stop charging automatically upon completion.
Built of sturdy, heat-shedding die-cast aluminum, the BR35 features Advanced Temperature Regulation circuitry, overcharge and over-discharge protection, constant circuit (non-PWM) anti-flicker design, and an optic lens with anti-reflective coating and a Precision Digital Optics Technology (PDOT) reflector. It carries an IPX7 water-resistance rating, so rain is no cause for concern, and is rated impact-resistant to 1.5m.
- Light Performance
-
- Long-range beam: 1000/550/330/16 lumens
- Short-range beam: 800/465/285/150 lumens
- Dual beam: 1800/1015/615/300 lumens
- Two Cree XM-L2 U2 LEDs
- City, Road, and Trail modes
- Diffuser reflection board eliminates front wheel dark spot
- Anti-reflective coated lens and PDOT reflector for optimal performance
- Max beam distance of 176m
- Switching
-
- Mode, plus, and minus buttons on lamp
- Remote switch permits operation without removing hands from handlebars
- Construction Details
-
- OLED display shows mode, brightness level, and remaining runtime
- Quick-release mount
- Die-cast aluminum construction
- Structural heat sink and electronic temperature control
- Mirco-USB rechargeable 6800mAh lithium-ion battery
- Overcharge and over-discharge protection
- Non-PWM circuitry for consistent and flicker-free performance
- IPX7 water resistant
- Impact-resistant to 1.5m
In The Box
- Mirco-USB Charge Cable
- Handlebar Remote Switch
- Quick-Release Mount
- 2 x Mount Shim
- Limited Lifetime Warranty
NOT FOR SALE OUTSIDE OF NEW ZEALAND
Warranty
We provide warranty for our products for a period of up to 5 years. Within the period covered under warranty, we will repair or replace any Nitecore product that has ceased to function properly. Please refer to table below for warranty periods for different products. Warranty is applicable only to products and accessories listed.
Limited lifetime warranty: Upon expiration of their respective warranty periods, all Nitecore products will receive continuing support through our limited lifetime warranty. The limited lifetime warranty covers labor costs and maintenance with the exclusion of accessories or replacement parts.
Nitecore will replace malfunction products with an upgraded model in the same series or one that of similar performance for customers if replacement can’t be made within due time when certain products are discontinued or for other reasons.
Warranty Details
Our authorized dealers and distributors are responsible for warranty service. Should any problem covered under warranty occurs, customers can contact their dealers or distributors in regards to their warranty claims, as long as the product was purchased from an authorized dealer or distributor.
NITECORE’s Warranty is provided only for products purchased from an authorized source. This applies to all NITECORE products.
Unauthorised third party repair and modification voids NITECORE’s warranty.
NITECORE’s warranty service is rendered NULL AND VOID if
- Â Failure or damage caused by artificial destruction, unauthorized modification or reconstruction.
- Â Failure or damage caused by improper use, storage or maintenance (for details please refer to the user manual)
- Â Damage caused by battery leakage.
- Â Damage caused by improper maintenance
- Â Ordinary wear and tear/colour fading
| Product | Warranty |
| Lighting Products without battery | 5 years |
| Lighting products with built-in battery | 2 years |
| Chargers & NL batteries | 12 months |
| IMR Batteries | 3 months |
| Textiles | 2 years |
Statement
- Product appearance is excluded from warranty.
- Should any discrepancy exist between Nitecore’s terms and other warranty service details, Nitecore’s terms will be applied.
- The rights of the amendment, interpretation of these terms are reserved by NITECORE. All terms come into effect immediately upon their announcement.
To guarantee a swift and effective customer service, Nitecore suggests you to contact the point of purchase for assistance. If you have any further questions regarding the use of your NITECORE product, please feel free to contact your local distributor, reseller or retailer.