Description
| Max Output | 6000 |
| Max Beam Distance | 655 |
| Max Beam Intensity | 107200 |
| Max Runtime | 1000 h 0 m / 41.7 d |
| LED | 4 X CREE XHP35 HI |
| Reflector | SMO |
| Battery | 4 × 18650 ,NBP68HD |
| Special Modes | Location Beacon,SOS,Strobe |
| Beam Colour | White light |
| Length | 142 mm / 5.59 in |
| Head Size | 68 mm / 2.67 in |
| Weight | 414 g / 14.6 oz |
| Feature | Rechargeable,Tail Stand |
| Activity | Search,Outdoor/Camping |
For a flashlight under 6″ long, the Nitecore TM28 Tiny Monster Rechargeable boasts an impressive list of capabilities, including a 6000-lumen maximum output, a minimum setting that will run for more than 40 days, and an OLED text display of the torch’s vital signs.
Its head has four white Cree XHP35 HI LED emitters that shine at five output levels, plus location beacon, SOS, and disorientating strobe. The low output is ideal for reading or rummaging in a pack, while the turbo mode is designed for search and rescue efforts that require the brightest possible illumination. You’ll know the status of your TM28 without having to decipher a code of blinking LEDs because the text display shows brightness level, battery level and voltage, remaining runtime, charging status, and operating temperature. A single, intelligent two-stage push button switch controls all the output and mode functions in an easy-to-use interface.
The aluminum alloy housing has a hard-anodized black finish to resist corrosion and scratches. The emitter lens has anti-reflective coatings on both sides and is tempered to be resistant to breaking and scratching. This durable light is impact-resistant to 5′ and submersible to 6.6′. To help prevent over-heating, hardened heat-dissipating fins are machined into the head. Protection circuitry also prevents heat damage by monitoring the temperature and will automatically step-down the output or shut off the light if it gets too hot. There’s a lockout function to prevent the light from being turned on accidentally while in transport or storage, and the four 18650 batteries recharge on-board, using intelligent circuitry that knows just how much juice they need.
- Light Performance
-
- Min: 2 lumens
- Low: 320 lumens
- Med: 1000 lumens
- High: 2300 lumens
- Turbo: 6000 lumens (when using IMR batteries)
- 4 x Cree XHP35 HI LEDs
- Smooth PDOT aluminum reflector optimizes available light and minimizes light loss
- Bright center cone of light with large, dimmer peripheral ring
- Emergency SOS beacon automatically cycles through Morse-code sequence
- Disorientating strobe-mode
- Flashing signal beacon
- Switching
-
- Location: Handle
- Type: Two-stage push button
- Momentary and constant-on modes
- Click switch to activate Turbo mode
- Press switch half-way to select output level
- Click while on any output to turn off
- At any output, half-press and hold to activate turbo output, half-press again to return to previous output
- Intelligent switch remembers last output selected
- Rapid double-click to activate strobe. While in strobe-mode, press button half-way to activate SOS, press again for signal beacon
- Dual lock-out functions prohibit accidental activation
- OLED Display
-
- Provides constant feedback on state of light
- Displays selected lumen output and intensity level
- Temperature feedback to prevent over-heating
- Provides approximate remaining runtime
- Shows charging state and voltage
- Display function button provides real-time information
- Construction Details
-
- Lightweight and durable aluminum alloy housing
- Corrosion and scratch-resistant type III hard-anodized finish
- Impact-resistant to 5′
- IPX8-rated, waterproof and submersible to 6.6′
- Dual-sided anti-reflective coated and tempered glass emitter lens
- Stainless steel bezel protects lens against drops and impacts
- 1/4″-20 socket to mount on tripod to use as hands-free area lighting
- Flat tailcap allows light to be stood with head facing up
- Hardened, heat-diffusion fins help prevent over-heating
- Charging port cover maintains IPX8-rating
- Square anti-roll head
- Electronics Details
-
- Integrated power indicator
- Voltage detection system optimizes charge time
- Over-charge protection prevents damage to batteries
- Over-heat circuitry steps output down to prevent damage
- Charging port: Charge batteries without removing from flashlight
In The Box
NITECORE TM28 Tiny Monster Rechargeable LED Flashlight
4 x IMR 18650 Batteries
Holster
Lanyard
Spare O-Ring
Charging Adapter & Cable
Limited Lifetime Warranty
NOT FOR SALE OUTSIDE OF NEW ZEALAND
Accessories
Warranty
We provide warranty for our products for a period of up to 5 years. Within the period covered under warranty, we will repair or replace any Nitecore product that has ceased to function properly. Please refer to table below for warranty periods for different products. Warranty is applicable only to products and accessories listed.
Limited lifetime warranty: Upon expiration of their respective warranty periods, all Nitecore products will receive continuing support through our limited lifetime warranty. The limited lifetime warranty covers labor costs and maintenance with the exclusion of accessories or replacement parts.
Nitecore will replace malfunction products with an upgraded model in the same series or one that of similar performance for customers if replacement can’t be made within due time when certain products are discontinued or for other reasons.
Warranty Details
Our authorized dealers and distributors are responsible for warranty service. Should any problem covered under warranty occurs, customers can contact their dealers or distributors in regards to their warranty claims, as long as the product was purchased from an authorized dealer or distributor.
NITECORE’s Warranty is provided only for products purchased from an authorized source. This applies to all NITECORE products.
Unauthorised third party repair and modification voids NITECORE’s warranty.
NITECORE’s warranty service is rendered NULL AND VOID if
- Failure or damage caused by artificial destruction, unauthorized modification or reconstruction.
- Failure or damage caused by improper use, storage or maintenance (for details please refer to the user manual)
- Damage caused by battery leakage.
- Damage caused by improper maintenance
- Ordinary wear and tear/colour fading
| Product | Warranty |
| Lighting Products without battery | 5 years |
| Lighting products with built-in battery | 2 years |
| Chargers & NL batteries | 12 months |
| IMR Batteries | 3 months |
| Textiles | 2 years |
Statement
- Product appearance is excluded from warranty.
- Should any discrepancy exist between Nitecore’s terms and other warranty service details, Nitecore’s terms will be applied.
- The rights of the amendment, interpretation of these terms are reserved by NITECORE. All terms come into effect immediately upon their announcement.
To guarantee a swift and effective customer service, Nitecore suggests you to contact the point of purchase for assistance. If you have any further questions regarding the use of your NITECORE product, please feel free to contact your local distributor, reseller or retailer.
