Description
| Max Output (lumens) | 1000 |
| Max Beam Distance (m) | 320 |
| Max Beam Intensity (cd) | 25700 |
| Max Runtime | 520 h 0 m / 21.66 d |
| LED | CREE XP-L HI V3 |
| Reflector | SMO |
| Battery | 1 × 18650 ,2 × CR123 ,2 x RCR123 |
| Special Modes | Â Location Beacon,SOS,Strobe |
| Beam Colour | White light |
| Length | Â 139.2 mm / 5.47 in |
| Head Size | Â 25.4 mm / 1 in |
| Weight | 87 g / 3.06 oz |
| Feature | Â Hybrid,Rechargeable |
| Activity | Gear,Hunting,Law Enforcement,Military,Search,Outdoor/Camping |
Accessories
NOT FOR SALE OUTSIDE OF NEW ZEALAND
Designed with military and law-enforcement use in mind, the Nitecore MH12 Multitask Hybrid Series Rechargeable LED Flashlight is a powerful and compact pocket-sized light that is as small as most back-up lights but powerful enough to use as a primary EDC illuminator. Its output comes from a white Cree XP-L HI V3 LED with four outputs from 1 to 1000 lumens. The output intensity, strobe, location beacon, and SOS signal modes are controlled using an intelligent selector switch on the body. The switch remembers the last output intensity used and automatically goes to that output level the next time it is turned on, even with momentary activation.
Built for durability, this light features an aluminum housing with a Type III hard-anodized finish that resists scratching and corrosion. It is O-ring sealed with an IPX8 rating for submersion to 6.6′, and is impact resistant to 5 feet. The light runs on one 18650 rechargeable battery and has an integrated charging port to enable powering up the battery while it is in the light for additional convenience. In a pinch, the light will run on two CR123A disposable batteries, but with reduced runtimes. Reverse-polarity protection circuitry prevents damage to the light’s circuitry if the batteries are put in incorrectly, over-heat protection circuitry automatically steps down the output if the light gets too hot, and fins machined into the head help to dissipate heat.
- Performance
-
- Min: 1 lumen
- Low: 55 lumens
- Med: 280 lumens
- High: 1000 lumens
- One Cree XP-L HI V3 LED
- Precision Digital Optics Technology reflector for long throw
- Maximum runtime 520 hours
- Emergency SOS mode automatically cycles through Morse-code sequence
- Location beacon mode emits a slow intermittent flash to signal
- Disorientating strobe mode
- Switching
-
- Location: Tailcap
- Type: Two-stage push button
- Mode body switch controls output intensity and mode
- Momentary and constant-on modes
- Use mode switch to access output intensity and strobe modes
- Last-output memory switch automatically goes to last output selected
- Construction
-
- 1″ diameter bezel
- Lightweight and durable aluminum alloy housing
- Corrosion and scratch-resistant type-III anodized finish
- Anti-reflection coated impact-resistant tempered glass window
- IPX8-rated, waterproof and submersible to 6.6′
- Shock resistant to 5′
- Heat dissipating fins machined into head
- Anti-roll collar
- Textured slip-resistant grip
- Includes holster, stainless steel clip, and lanyard
- Removable tactical ring to facilitate multiple tactical light/pistol grips
- Power and Charging
-
- After 3 minutes on high, output is stepped-down to prevent overheating and extend battery charge
- Digitally-regulated output maintains consistent beam intensity throughout battery charge
- Integrated micro-USB port to charge battery in light
- Automatically detects battery status and adjusts mode to optimize battery charge
- Power indicator light displays remaining battery power
- Reverse polarity protection prevents damage if battery is installed incorrectly
- Runs on one 18650 rechargeable or two CR123A disposable batteries
- Includes one Nitecore 18650, 3400mAh battery
In The Box
- 18650 Battery
- USB Charging Cable
- Holster
- Stainless Steel Clip
- Lanyard
- Tactical Ring
- Spare Switch Boot
- Spare USB Port Cover
- Spare O-Ring
- Limited Lifetime Warranty
Warranty
We provide warranty for our products for a period of up to 5 years. Within the period covered under warranty, we will repair or replace any Nitecore product that has ceased to function properly. Please refer to table below for warranty periods for different products. Warranty is applicable only to products and accessories listed.
Limited lifetime warranty: Upon expiration of their respective warranty periods, all Nitecore products will receive continuing support through our limited lifetime warranty. The limited lifetime warranty covers labor costs and maintenance with the exclusion of accessories or replacement parts.
Nitecore will replace malfunction products with an upgraded model in the same series or one that of similar performance for customers if replacement can’t be made within due time when certain products are discontinued or for other reasons.
Warranty Details
Our authorized dealers and distributors are responsible for warranty service. Should any problem covered under warranty occurs, customers can contact their dealers or distributors in regards to their warranty claims, as long as the product was purchased from an authorized dealer or distributor.
NITECORE’s Warranty is provided only for products purchased from an authorized source. This applies to all NITECORE products.
Unauthorised third party repair and modification voids NITECORE’s warranty.
NITECORE’s warranty service is rendered NULL AND VOID if
- Â Failure or damage caused by artificial destruction, unauthorized modification or reconstruction.
- Â Failure or damage caused by improper use, storage or maintenance (for details please refer to the user manual)
- Â Damage caused by battery leakage.
- Â Damage caused by improper maintenance
- Â Ordinary wear and tear/colour fading
| Product | Warranty |
| Lighting Products without battery | 5 years |
| Lighting products with built-in battery | 2 years |
| Chargers & NL batteries | 12 months |
| IMR Batteries | 3 months |
| Textiles | 2 years |
Statement
- Product appearance is excluded from warranty.
- Should any discrepancy exist between Nitecore’s terms and other warranty service details, Nitecore’s terms will be applied.
- The rights of the amendment, interpretation of these terms are reserved by NITECORE. All terms come into effect immediately upon their announcement.
To guarantee a swift and effective customer service, Nitecore suggests you to contact the point of purchase for assistance. If you have any further questions regarding the use of your NITECORE product, please feel free to contact your local distributor, reseller or retailer.